Powered by Blogger.

Search This Blog

Archives

Bağlantılar

Popular Posts

Archives

Sunday, July 22, 2012

5000 Mouthpiece problem 5000 Mic Problem 5000 Microphone Problem 5000 Mic Ways 5000 Microphones Ways 5000 Mic Jumpers 5000 Microphone Jumpers


Here's the solution which help to repair Nokia 5000 Mouthpiece microphone failure problem.
This manual or repair guide shows the microphone's components connection on the main PCB board assembly (printed circuit board). Including the terminal connection within the inner solder ball terminals of the power IC.






Repair Tips and procedure: 
1. check the mouthpiece microphone, replace if found damaged
2. check the microphone's terminal pads free from dirt and corrosion.
3. check the two filter coils, replace if found open or damaged.
4. check replace the capacitors near the power supply IC.
5. trace the line paths and if found open or cut, apply a tiniest magnetic jumper wire on it , its a recycling method but anyway it is very useful.

Note:  It need expertise on this next procedures, if the solutions above does not solve the problem.
doing this process without related experience might end up killing the phone.
1. reflow or reheat the power IC using a Hot Air Gun, with proper controlled heat temperature.
2. remove the power IC, check each line paths indicated on the repair picture solution to each corresponding connected components.
3. Rework or reball the power IC's solder balls.


We personally tried and tested this solution and serve as our guide
for the following questions we search with.
5000 Mouthpiece problem
5000 Mic Problem
5000 Microphone Problem
5000 Mic Ways
5000 Microphones Ways
5000 Mic Jumpers
5000 Microphone Jumpers

0 comments:

Post a Comment

FIND ME ON FACE BOOK

YOU MAY LIKE THIS BLOG

VISITORS

Lebels

Recent Posts

Design by araba-cı | MoneyGenerator Blogger Template by GosuBlogger